Locked Obi1032 - Is there any way to get GV on it?
Meats:
Quote from: azrobert on September 28, 2017, 11:27:00 am
Quote from: Meats on September 28, 2017, 10:55:23 am
Thanks, I guess that only works for incoming
From Simon Telephonics:
Convert your Google Voice number to a standard SIP connection.
Place and receive Google Voice calls with your VoIP ATA or IP phone, Asterisk, FreeSWITCH, or any SIP PBX.
Oh... the gateway page threw me off then.
"The Google Voice Gateway connects your Google Voice number to any SIP device or URI (incoming calls only)."
https://simonics.com/gw/
azrobert:
Another option is to run a Yate Server. It's a much easier install than Asterisk. It downloads and installs in 1-2 minutes then you need to modify about 6 config files. I've only used Yate on a Windows machine and can help you with the configuration.
http://www.yate.ro/
SupTeamGuy:
For an OBi unit that is locked to a VoIP Service Provider, such as yours, there is no way that you or Phonepower support team can unlock it. Best option is to return your OBi1032 to where you bought it from for a full refund. Then go get a new OBi1032 at Amazon.com and make sure it's "Ships from and sold by Amazon.com". This will allow you to add Google Voice service (and/or Phonepower service if you want).
Best,
SupTeamGuy
JQOBi1000user:
If you want to return it, I say return it. But you don't have to, and you can use it with any SIP provider. Google Voice is out, its not SIP or its some version that requires OBiTalk and a STUN server to work. OBi will NOT help you. I have several OBi1022s, OBi1032s, and OBi1062s. The ones that are locked with PhonePower work with two different SIP providers at the same time without a problem, and I it was the first two I picked. I use extension dialing, group paging, everything on a locked phone!
You just have to use the local configuration rather than the OBiTalk Dashboard, and OBI will not help you. Look at the Phone IP, its in settings on the phone. Then go to that IP in a webpage, admin/admin is the default, if it says invalid, do a factory reset (hold down home and back for 30 seconds when plugging in the phone), then edit the ITSP profile (just one per service) and the Voice Service (one per extension), add as many line appearances as your SIP provider gives you (for conferencing etc) per extension, and you are done. I use a 1062 while sitting outside with Wifi, full use and function and SIP providers are cheap these days.
You can also use PhonePower, they will setup one phone, and you can activate SIP creds for an additional 5. I got PhonePower, but the support took 20 days before they finally provisioned one phone. They also locked the phone so I can't edit keys. So I dropped them, but if you have one phone...it worked really well.
So its up to you, but I would keep it. Contact PhonePower or setup a SIP account, its not that hard. If you need more help, post again. And NO, I don't sell them on e-bay :)
Navigation
[0] Message Index
[*] Previous page