OBI200 + OBI202 + 2 Google Voice #s + Snom 370

<< < (2/2)

sandsofdorn:
No luck at all with this.

With the default setup of the OBI202, Google Voice works fine using analogue handset.

Adding Snom IP phone and updating settings as described above results in:

- incoming calls to GV number no longer ring analogue handset
- outgoing GV calls from analogue handset still work
- Snom phone - doesn't react at all to income calls, outgoing calls all result in busy signal

How can I debug?

azrobert:
My mistake on the sp1 inbound route. You should add the code, not replace the existing code. If you want to route calls to ph1 and the IP phone it should look like this:

Voice Services -> SP1 Service -> X_InboundCallRoute:
ph,SP4(OBi202@local_client)

This will only correct inbound calls not ringing the Phone1 port.

Does the Snom show registered?

In OBi Expert go to Status -> System Status
The SP4 Status should look something like this:
Registration Not Required;local_client=192.168.1.100:5060

If the Snom is not registering, can it be configured to call without registration?

sandsofdorn:
thanks,

that still doesn't fix incoming calls - also tried ph1,SP4(OBi202@local_client)

SP4 Status simply says "Registration Not Required"

azrobert:
"Registration Not Required" indicates the Snom is not registering to your OBi202

Maybe you should change the SP1 X_InboundCallRoute back to ph until we resolve the registration problem.

What does your network look like?
Do you have another router?
Are you running the OBi202 in Router or Bridge mode?
Is the Snom connected to the OBi202 or a different router?
If you are running in Router mode, can you connect the Snom directly to the OBi202?

Navigation

[0] Message Index

[*] Previous page