Two Obi110s, USA <---> DR How to connect them...

(1/5) > >>

plc101man:
I have two Obi110s, one in the USA and one that I'm about to send to Dominican Republic.

Thanks to RonR to help me setup the one in USA.

This is what I'm trying to set up:

* Obi110 #1  (USA) [ Google Voice in SP1 for incoming and outgoing calls ] [Callcentric in SP2 for 911 and international calls]  All this works great. Thanks RonR !!!

* Obi110 #2 (DR)  [Google Voice in SP1 to bridge a DR POTS line in the line port] [Another Google Voice in SP2 for the phone port for inbound and outgoing calls to USA only]

What I would like to do is this:

1. When an incoming call in the DR pots line comes in I would like to bridge it to Google Voice in SP1 and call the callcentric account in my Obi110.

2. If the above is not possible how do I bridge the call directly to the Obi110 #1 in the USA.

3. I would like to add trusted caller IDs from DR so they can make USA calls using the Google Voice in SP1.


Thanks in advance...

RonR:
Before proceeding, would it be more advantageous for both OBi's to be able to freely make calls through through their own trunks as well as the other OBi's trunks?  If so, then the same solution for multiple OBiON Apps is the solution for multiple OBi's:

http://www.obitalk.com/forum/index.php?topic=1103.0

The beauty of using this approach is that adding more OBi's and/or OBiON Apps requires almost no work.  The configuration in each OBi is identical and the only change required to existing OBi's when you add another OBi or OBiON App is adding the new OBiTALK number(s) to the Circle of Trust DigitMap (cot).

plc101man:
Quote from: RonR on August 06, 2011, 02:10:31 pm

Before proceeding, would it be more advantageous for both OBi's to be able to freely make calls through through their own trunks as well as the other OBi's trunks?  If so, then the same solution for multiple OBiON Apps is the solution for multiple OBi's:

http://www.obitalk.com/forum/index.php?topic=1103.0

The beauty of using this approach is that adding more OBi's and/or OBiON Apps requires almost no work.  The configuration in each OBi is identical and the only change required to existing OBi's when you add another OBi or OBiON App is adding the new OBiTALK number(s) to the Circle of Trust DigitMap (cot).



Sounds very cool...
I'll give a try, even though my needs are simple.
I just need two Obi110s to bridge to each other.
Í'll post my progress.

Thanks RonR I'll give it a whirl...

plc101man:
RonR:

Hmmm...   I entered the settings per the post but I cannot get them to work...

I just need to ring SP1 (with Google Voice) every time an incoming call in LINE port comes in or forward the call to another number.

Thanks for all your hard work !!!

RonR:
As you can see from the comments by others, it does work.

If you post your settings, I'll help you figure out where things went wrong.

Navigation

[0] Message Index

[#] Next page