Two Obi110s, USA <---> DR How to connect them...
plc101man:
RonR:
Here are my settings.
OBi # : OBiTALK #
==== =======
OBi #1 : 200304652
OBi #2 : 200825507
=========================================================================================================
Obi110 #1 (USA) Settings:
Voice Services -> OBiTALK Service -> InboundCallRoute:
{(Mcot)>(Mpsp1):psp1},{(Mcot)>(<*1:>(Msp1)):sp1},{(Mcot)>(<*2:>(Msp2)):sp2},{(Mcot)>(<*8:>(Mli)):li},
{(Mcot)>(<*9:>(Mpp)):pp},{(Mcot)>(<**1:>(Msp1)):sp1},{(Mcot)>(<**2:>(Msp2)):sp2},
{(Mcot)>(<**8:>(Mli)):li},{(Mcot)>(<**9:>(Mpp)):pp},{(Mcot):aa},{ph}
User Settings -> User Defined Digit Maps -> User Defined Digit MapX:
Label : cot
DigitMap : (200825507|290225640)
In the PHONE Port and Auto Attendant DigitMap's, change [1-9]x?*(Mpli) to [1-9]x?*@@.
Current Settings:
Phone Port:
[1-9]x?*@@.|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))
Auto Attendant:
[1-9]x?*@@.|[1-9]|[1-9][0-9]|<00:$1>|0|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))
In the PHONE Port and Auto Attendant OutboundCallRoute's, change {([1-9]x?*(Mpli)):pp} to {([1-9]x?*@@.):pp}
Current Settings:
Phone Port:
{([1-9]x?*(Mpli)):pp},{(<#:>):li},{911:sp2},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1}, {(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Auto Attendant:
{([1-9]x?*@@.):pp},{0:ph},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Speed Dial #1 : **9290225640
Speed Dial #2 : PP(ob200825507)
Speed Dial #3 : **9200825507
Speed Dial #4 : **9300339817
=========================================================================================================
Obi110 #2 (RD) Settings:
Voice Services -> OBiTALK Service -> InboundCallRoute:
{(Mcot)>(Mpsp1):psp1},{(Mcot)>(<*1:>(Msp1)):sp1},{(Mcot)>(<*2:>(Msp2)):sp2},{(Mcot)>(<*8:>(Mli)):li},
{(Mcot)>(<*9:>(Mpp)):pp},{(Mcot)>(<**1:>(Msp1)):sp1},{(Mcot)>(<**2:>(Msp2)):sp2},
{(Mcot)>(<**8:>(Mli)):li},{(Mcot)>(<**9:>(Mpp)):pp},{(Mcot):aa},{ph}
User Settings -> User Defined Digit Maps -> User Defined Digit MapX:
Label : cot
DigitMap : (200304652|290225640)
In the PHONE Port and Auto Attendant DigitMap's, change [1-9]x?*(Mpli) to [1-9]x?*@@.
Current Settings:
Phone Port:
[1-9]x?*@@.|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))
Auto Attendant:
[1-9]x?*@@.|[1-9]|[1-9][0-9]|<00:$1>|0|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))
In the PHONE Port and Auto Attendant OutboundCallRoute's, change {([1-9]x?*(Mpli)):pp} to {([1-9]x?*@@.):pp}
Current Settings:
Phone Port:
{([1-9]x?*@@.):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Auto Attendant:
{([1-9]x?*@@.):pp},{0:ph},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Speed Dial #1 : **9290225640
Speed Dial #2 : PP(ob200825507)
Speed Dial #3 : **9200825507
Speed Dial #4 : **9300339817
RonR:
Both units should be configured identically:
Voice Services -> OBiTALK Service -> InboundCallRoute : {(Mcot)>(Msp1):sp1}...
User Settings -> User Defined Digit Maps -> User Defined Digit MapX:
Label : cot
DigitMap : (200304652|200825507|290225640)
Physical Interfaces -> PHONE Port -> OutboundCallroute : {([1-9]x?*@@.):pp}...
Speed Dial:
2 : PP(ob200304652)
3 : PP(ob200825507)
plc101man:
Quote from: RonR on August 10, 2011, 06:02:06 pm
Both units should be configured identically:
Voice Services -> OBiTALK Service -> InboundCallRoute : {(Mcot)>(Msp1):sp1}...
User Settings -> User Defined Digit Maps -> User Defined Digit MapX:
Label : cot
DigitMap : (200304652|200825507|290225640)
Physical Interfaces -> PHONE Port -> OutboundCallroute : {([1-9]x?*@@.):pp}...
Speed Dial:
2 : PP(ob200304652)
3 : PP(ob200825507)
RonR:
Thanks !!!
I had a few typos... :( sorry...
I tried the calling from every line (of the two Obi110's) and it works like a champ !!!
How do I make now all incoming calls in LINE [Obi110 #2 (RD)] to always ring the SP1 [Obi110 #2 (RD)] ???
Thanks in advance !!!
RonR:
Quote from: plc101man on August 10, 2011, 06:23:43 pm
I tried the calling from every line (of the two Obi110's) and it works like a champ !!!
That's great!
Quote from: plc101man on August 10, 2011, 06:23:43 pm
How do I make now all incoming calls in LINE [Obi110 #2 (RD)] to always ring the SP1 [Obi110 #2 (RD)] ???
If you want all calls that arrive on the LINE Port of the second OBi to be forwarded out SP1 of that OBi:
Physical Interfaces -> LINE Port -> InboundCallRoute : {SP1(12341234567)}
where 12341234567 is the number you want those calls forwarded to.
plc101man:
Quote from: RonR on August 10, 2011, 06:47:15 pm
Quote from: plc101man on August 10, 2011, 06:23:43 pm
I tried the calling from every line (of the two Obi110's) and it works like a champ !!!
That's great!
Quote from: plc101man on August 10, 2011, 06:23:43 pm
How do I make now all incoming calls in LINE [Obi110 #2 (RD)] to always ring the SP1 [Obi110 #2 (RD)] ???
If you want all calls that arrive on the LINE Port of the second OBi to be forwarded out SP1 of that OBi:
Physical Interfaces -> LINE Port -> InboundCallRoute : {SP1(12341234567)}
where 12341234567 is the number you want those calls forwarded to.
If I were to change it to:
Physical Interfaces -> LINE Port -> InboundCallRoute : {SP1}
Would it just ring the Google Voice number setup in SP1 ???
Navigation
[0] Message Index
[#] Next page
[*] Previous page