TCP connection to 125.141.125.74 failed
GreenView:
After working fine for years, suddenly my Obi200 device refuses to make or receive calls. On outgoing calls it says "No Service Configured error". Logging into obitalk.com it shows "Backing off: TCP connection to 125.141.125.74 failed". That address is in Korea. A ping to that address works fine.
What is going on?
Adding, the device has one line configured, to use Google. The Google account works fine using Hangouts on my mobile phone. Inbound ports 10000-10099 are routed to the ObiTalk device.
Taoman:
What DNS server are you pointing at? You might want to change your DNS to Google's public DNS servers (8.8.8.8 and/or 8.8.4.4) just to see if it makes any difference. Once you change your DNS I would restart your modem, router, and OBi device in that order.
kevin-in-sa:
Did you ever solve this? I am having the same problem with OBi100. I tried everything I could find on the web with the exception of upgrading the firmware. It seems the link to the firmware is a broken link http://fw.obihai.com/OBi-latest.fw . That URL returns a "404 Not Found" error. So I can't upgrade the firmware. Did OBi cease supporting the OBi100?
UPDATE: I just ran across this announcement from OBi - http://blog.obihai.com/2016/08/end-of-life-announcement-obi100-and.html
I guess we were warned.
Taoman:
Quote from: kevin-in-sa on October 30, 2017, 08:48:14 am
UPDATE: I just ran across this announcement from OBi - http://blog.obihai.com/2016/08/end-of-life-announcement-obi100-and.html
This issue (whatever the hell it is!) is unrelated to the 1xx series being End Of Life. As long as you have the latest firmware (1.3.0 Build: 2886) your OBi 100 should continue to function just fine.
http://fw.obihai.com/OBi110-1-3-0-2886.fw
Just to be clear, you are located in the U.S. and you are not using a VPN? Correct?
Does ANYONE have any ideas on what could be causing this? I'm getting a brain cramp trying to figure out what could be generating these Korean IP addresses.
GPz1100:
See this on both obi's here too. Can't dial out with gv. Inbound works fine because it goes through callcentric.
Reboot doesn't help.
-------------------
Edit: Will give this a few hours to resolve. If not, then it's plan b. I was hoping to keep the obi boxes completely separated from the pbx. But looks it's time to add the gv lines to it and point the obi to the pbx rather than gv directly.
Navigation
[0] Message Index
[#] Next page