OBi100 Cannot Update Firmware
Javelina:
When I hook up a phone and dial either of those numbers, I hear some vague clicking sounds and then a more distinct sound that sounds more like a hang up. However, I get no tone or anything at all. On my OBi are twio alternating green lights on the outside and and then a red blink in the middle.
drgeoff:
Have you had this OBi110 and this phone working together before or is this a fresh OBi110 that you are attempting to use for the first time?
When you take the phone off-hook do you hear dial tone. You already failed to answer that. If yes, is the phone a pulse dial only one or set to pulse dial? OBis will only work with tone dialling. (aka TouchTone or DTMF.)
An OBi110 has 4 LEDs. There is no middle LED.
Javelina:
Apologies, this is an OBi100, not a 110. I haer nothing at all and am using an old style touch tone phone.
drgeoff:
I can only help you if you answer all the questions.
Is it correct that you do not hear dial tone when you lift the handset?
Javelina:
This is an OBi100 that has been sitting in a box for well over a year. I have never tried to set it up before. I do not hear a dial tone and trying to dial the various numbers results in the same pattern of repeating clicks but never a connection. Thank you.
Navigation
[0] Message Index
[#] Next page
[*] Previous page