GV Message "Backing Off :TCP connection to 125.190.233.64 failed"
bsdaiwa:
Dammmm, back to square one, I changed my settings on SP3 from Simonics back to the default OBi/GV setup and when the OBi rebooted I got the same message on both GV accounts:
Connecting to 64.233.190.125
followed by, after a short time
Backing Off :TCP connection to 125.190.233.64 failed
To recap, last night SP2 went from the backing off message to Connected and SP3 was connected using Simonics, this morning I attempted to reset SP3 to the default OBi/GV setup and after reboot SP2 went back to error along with SP3.
bsdaiwa:
Followed this advice and it fixed the problem.... https://www.obitalk.com/forum/index.php?topic=13022.msg83984#msg83984
Read the last three (3) posts in that message it fixed my problem.
NikTalk:
Quote from: bsdaiwa on November 01, 2017, 02:52:37 am
Followed this advice and it fixed the problem.... https://www.obitalk.com/forum/index.php?topic=13022.msg83984#msg83984
Read the last three (3) posts in that message it fixed my problem.
Thank you bsdaiwa for the reference!
The Obi202 started working automatically this morning. ObiHai must have fixed the DNS referral.
The Obi101 wasn't working and I followed the directions from the post link you provided and changed the DNS to Comodo servers manually. Now it is working again. ;D
drgeoff:
Quote from: NikTalk on November 01, 2017, 05:28:44 am
ObiHai must have fixed the DNS referral.
OBihai do not run Domain Name Server(s). Obihai cannot change the Domain Name Server(s) that your OBi device goes to. So the statement "Obihai must have fixed the DNS referral." does not hold any water.
Navigation
[0] Message Index
[*] Previous page