November 13, 2018, 11:38:43 pm *
Welcome, Guest. Please login or register.
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
Author Topic: Can the Obi212 do it?  (Read 2463 times)
Posts: 1

« on: November 01, 2017, 09:27:20 am »

I have a specialty "softphone" that I have that makes VoIP calls to a "SIP compatible VoIP internet account or PBX". It's working just fine using Callcentric. The issue I have is when my Internet connection fails it can no longer make calls. I need something that will fail-over to the PSTN. I would even be okay if it gave preference to the PSTN.
So can the OBi212 do the job? I know I can set it up to use Callcentric, but how would I get it to allow a local "softphone" to connect to it and make VoIP, or just PSTN, calls? I've attached a diagram of how I was thinking of connecting things.

* FXO CommBlock-small.jpg (33.92 KB, 825x638 - viewed 200 times.)
« Last Edit: November 01, 2017, 09:30:11 am by jasonhoyt » Logged
Hero Member & Beta Tester
Posts: 3771

« Reply #1 on: November 01, 2017, 10:05:01 am »

Yes.  Read  The OBi212 is almost the same as the Obi202 with one PHONE port replaced by an OBiLINE.
Hero Member & Beta Tester
Posts: 3629

« Reply #2 on: November 01, 2017, 10:14:02 am »

You would register the OBi212 to your SIP service provider.
Register the softphone to the OBi212 as per drgeoff's post.
Setup a trunk group with your SIP service provider and the Line port (PSTN).
If your service provider is not reachable, the call will failover to the line port.
Pages: [1]
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC