Backing Off : TCP connection to 173.194.193.125 failed . . . is BACK AGAIN
jmsnyc:
Hi,
I recently signed up for Simonics , followed the setup instructions in the linked thread , everything was working. Now getting the "failed to receive a response from service provider" for outbound calls ???
I kept everything default too - on the Obi dashboard it shows offline
billsimon:
Quote from: jmsnyc on December 12, 2017, 07:48:17 pm
Hi,
I recently signed up for Simonics , followed the setup instructions in the linked thread , everything was working. Now getting the "failed to receive a response from service provider" for outbound calls ???
I kept everything default too - on the Obi dashboard it shows offline
I recommend you do a little troubleshooting of your network and make sure the settings you applied are still there. I do not see any reasons from the GVGW perspective that you should be unable to connect.
koyao:
FWIW, I managed to get Google Voice work again with Obi100 by setting up an Asterisk server + Motif. I followed instructions at:
https://hobbiesbytwinclouds.wordpress.com/2017/01/23/set-up-a-google-voice-telephone-server-based-on-asterisk-pbx-in-15-minutes/
Abider:
Quote from: LTN1 on November 08, 2017, 08:23:24 pm
Quote from: atom on November 08, 2017, 08:08:53 pm
Does anyone have the skills to compare the .fw files of the last obi2xx and the new obi2xx firmware that resolves this issue and somehow incorporate those changes into the latest obi110 firmware?
I have a friend, a software engineer. He moonlights doing these things. He charges about $200 per hour and says he can probably incorporate the codes from the 2XX into the 1XX--and will probably only take about 7.5 hours to do. I can put you in touch with him...or you can buy the OBi212 for $80. Hard to decide isn't it?
Wow only 7.5 hours! Assuming that there was no hardware related reason to EOL the 1xx product line (big assumption) the break even point would only be 30 Obi100s. /s
Abider:
Quote from: koyao on December 13, 2017, 12:07:24 am
FWIW, I managed to get Google Voice work again with Obi100 by setting up an Asterisk server + Motif. I followed instructions at:
https://hobbiesbytwinclouds.wordpress.com/2017/01/23/set-up-a-google-voice-telephone-server-based-on-asterisk-pbx-in-15-minutes/
Thanks for the link. Seems like a fun project.
Navigation
[0] Message Index
[*] Previous page