Other person can't hear me.

<< < (19/25) > >>

dhfobi:
Quote from: richardcoop on March 13, 2012, 11:24:27 am

The maximum operating temperature  of the  obi is 45C (113F). I moved the obi 110 from on top of my warm router.

Lets see if that helps.

Good luck, but don't hold your breath  ;)
Mine is not on top of anything and the room temp is ~65F

richardcoop:
So far the voice quality has been better but now I have a new problem. People call, the phone rings and I can't pickuo. The caller is directed to voice mail and I am talking to a dead phone.

I and my wife are at our wits end.

dhfobi:
Quote from: richardcoop on March 13, 2012, 03:36:52 pm

I and my wife are at our wits end.


My wife has gone over the edge already, I however are more forgiving,..... up to a point.
35 people have reported the "Other person can't hear me problem" but there has yet to be an investigation and results reported back to this thread. What does it take to get the OBi tech support to investigate and respond? If nothing other than to say "we have exhaustedly investigated these reports and can say with assurance that this is not an Obi problem" That would be acceptable if true and would end this thread an send us elsewhere for the solution. I have Checked the GV forum and other than users not turning the mic on, on their computer, no one is complaining about this problem.

dlee:
This has been happening to me too. Randomly. But, today, on all my calls, no one on the other end can hear me.

I have not changed anything on my router, etc., and it was working before.
Also, I forwards ports (listed below) to my Obi110 (I have a WNR3500L)
TCP Ports: 6800, 5222, 5223
UDP Ports: 5060, 5061, 16600 to 16998
Allow Incoming on UDP Port: 10000

I also just used my Obi110 (via Google Voice) to call my cell, and I can not hear my voice on the cell.

I have reboot'd Obi110 serveral times (i.e. did not unplug Obi110)

Found Solution --- FYI -- My PROBLEM started today Mar. 14, 2012 ---
For some reason, the OBi110 is sending out packets on PORT 19305 today.
So, I added port 19305 into my QoS rule and everything worked.

Juniorr:
I just received my obi100 today and I am having the exact same problem.
I can hear them fine, they here my voice broken up.
No Solution?
Is it a hardware issue???

Navigation

[0] Message Index

[#] Next page

[*] Previous page