Ring one line at a time

(1/3) > >>

Morgen:
I use Obihai Obi202 with which i have 2 phone lines. the problem is that all my calls ring on both lines and even after i pick up the call  it still rings on the other line. is there anyway i can set that it only ring one line and if that line is busy it will ring the other?

i hope you understand...  :)

thanx

BigJim_McD:
Morgen, 
We use an OBi202 with a two line portable phone for our Home phone service.

I configured the following OBi202 configuration settings using OBiTalk OBiExpert Mode.

Voice Services > SP1 Service > X_InboundCallRoute > {ph1}

Calling Features > CallForwardOnBusyEnable   [x} {Checked}
CallForwardOnBusyNumber    ph2(#)

Physical Interfaces > PHONE1 Port > PHONE Port > Calling Feature
CallWaitingEnable [ ]   {NOT Checked}

Morgen:
what does the ph2(#) mean?

drgeoff:
Quote from: Morgen on November 15, 2017, 11:50:11 am

what does the ph2(#) mean?

On an OBi202, dialling a # calls the other phone port.

Morgen:
so i put in either ({ph2} or (#)) one or both ({ph2}(#))

Navigation

[0] Message Index

[#] Next page