Ring one line at a time
azrobert:
You can't just take the phone off-hook to make the line busy. You need to be on an active call. This is how it worked when I tested this function in the past. I assume it still works the same way.
Use ph2 for the BusyNumber. The (#) probably won't cause problems, but why use it if not needed.
The forwarding settings can be defined on either the Phone Port or the SPx Service. Use the SPx Service settings.
Morgen:
Quote from: azrobert on November 28, 2017, 03:01:29 pm
You can't just take the phone off-hook to make the line busy. You need to be on an active call. This is how it worked when I tested this function in the past. I assume it still works the same way.
Use ph2 for the BusyNumber. The (#) probably won't cause problems, but why use it if not needed.
The forwarding settings can be defined on either the Phone Port or the SPx Service. Use the SPx Service settings.
this also did not help. it only rings in ph1 for first call and ph2 never rings (when i call when ph1 is busy it just rings and goes to voicmail but none of the phones ring...)
Navigation
[0] Message Index
[*] Previous page