December 13, 2017, 05:10:29 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: obi100 stopped working  (Read 1297 times)
Wilbour
Jr. Member
**
Posts: 53


« on: November 20, 2017, 07:06:37 pm »

My faithful 100 stopped working this week. Quickly updated to the 200 and had it up and running in a flash. Biggest hurdle was to rewire the house for dual lines. See the 100 allowed for both POTS and VoIP to run through the unit so a digimap handled the exchange between the two.

Now I set up a dual line phone with an option for either. After a crash course on using all 4 wires and 2 lines I'm almost up and running.

What can I say, my wife refuses to drop the POTS line. What I didn't tell her was that the new setup uses VoIP by default. Pretty much the only time the POTS line will be used from now on is to receive calls from local callers.

Our families from another country call a local number for them and it rings my GV line (not to mention my cell #)

The things we do to keep the peace.
Logged
drgeoff
Hero Member & Beta Tester
*****
Posts: 2713


« Reply #1 on: November 21, 2017, 04:45:06 am »

See the 100 allowed for both POTS and VoIP to run through the unit so a digimap handled the exchange between the two.
Did you actually have an OBi110?  Otherwise I'd be very interested to know how you had POTS running through an OBi100.
Logged
Wilbour
Jr. Member
**
Posts: 53


« Reply #2 on: November 22, 2017, 01:46:22 pm »

Good catch. It was a 110
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC