On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT
OBi2182
OBi1022
Poly D230
OBi200
OBi202
OBi212
OBiWiFi5G
Started by videobruce, December 01, 2017, 11:10:20 AM
QuoteConfigure a static IP address;1. Disable DHCP, dial ***3, dial 1, dial 0#, dial 1 to save. 2. To enter IP address, dial *** 4, dial 1, dial IP address & #, dial 1 to save.IP Address 192.168.1.120 would be entered as: 192*168*1*120# 3. To enter subnet mask, dial *** 0, dial 23#4. To enter default gateway, dial *** 0, dial 22#5. To enter a DNS Server, dial *** 0, dial 24#
Quote from: videobruce on December 01, 2017, 11:12:05 AM2nd question;Does a power cycle reset any of the custom user settings?
Quote from: videobruce on December 01, 2017, 11:10:20 AMCan't a static IP address for the IP of this device be set from the WAN Settings of the Router tab? (I'm only talking about the IP address of the ATA, not using the LAN port.)
Quote from: videobruce on December 01, 2017, 10:34:41 PMThe static address I set well over a year ago got reset somehow, not by myself.Would/could anything that was done to a router cause this (not the OBi internal router)?