December 18, 2017, 12:49:56 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Receive lots of SIG Random calls after connect to Simonics GVGW  (Read 417 times)
peihsinhsu
Newbie
*
Posts: 2


« on: December 07, 2017, 07:36:36 am »

I have received a lot of  unknown phone call which is not shown in google voice call history.
The caller ID: 1-310-000-0000 and it calls 38 times every hour.

Reported to Simonics.

And he replied to  changed X_UserAgentPort outside of the 5000-6000 range.

I have changed X_UserAgentPort from 5060 to 7000, but it automatically settled to 5080.


Please help me how to change X_UserAgentPort  to outside of the 5000-6000 range or fix the SIG random calls.

Your help is deeply appreciated.


Logged
Taoman
Hero Member
*****
Posts: 945


« Reply #1 on: December 07, 2017, 09:31:28 am »


I have changed X_UserAgentPort from 5060 to 7000, but it automatically settled to 5080.


You need to uncheck both boxes to the right of the field you are trying change.

After changing the X_UserAgentPort, go up the page a bit and put a checkmark in front of:

X_AcceptSipFromRegistrarOnly

Again, you must uncheck both boxes to the right of any field you wish to edit. Then submit and save your changes.

Following the instructions above should fix the problem.

Edit: Just realized you are probably using an OBi1xx device which does not support X_AcceptSipFromRegistrarOnly so you won't be able to find that field. But changing the X_UserAgentPort should fix the problem.
« Last Edit: December 07, 2017, 09:44:39 am by Taoman » Logged
drgeoff
Hero Member & Beta Tester
*****
Posts: 2737


« Reply #2 on: December 07, 2017, 11:45:52 am »

If you are trying to make the change using your Obi's onboard web server interface, don't. You need to make the change using Expert mode on the Obitalk portal.
Logged
peihsinhsu
Newbie
*
Posts: 2


« Reply #3 on: December 08, 2017, 11:25:50 am »

Yes, I am able to save 7000 and I observed one day for random calls.
It seems fixed.

Thanks for all helped.


Peihsin
Logged
MLD100
Newbie
*
Posts: 7


« Reply #4 on: December 11, 2017, 08:14:03 am »

I migrated to Simonics GVGW on Dec 7tha after getting the 'TCP Backinf Off' error.  At first all look good but I soon was also receiving random calls.   These calls had a wierd caller id and did not show up in the GV log.  They would ring and ring.  If answered there would be a tone and then nothing.  Upon hanging up it would ring again almost instantly.  If I let it ring it would ring for about a full minute and then timeout but it would ring again in between 7 to 20 minutes.  Like someone else posted I had to unplug it to get some sleep.

But, I made the change described above.  Using the expert OBI interface I changed X_UserAgentPort to 7000.  I have waited two days and have not had any of these calls.   So, I am declaring it fixed--for the tme being anyway.
Logged
GPz1100
Full Member
***
Posts: 121


« Reply #5 on: December 11, 2017, 08:32:53 am »

Rather than fixing the symptom, fix the problem.  Review your firewall and set it to block any/all external inbound traffic. Hosts inside the firewall open ports to the outside.  Outside uses these ports to send data/traffic back; everything else is blocked.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC