Unable to do firmware upgrade for obi1032.
suresh33:
I have not been able to do a firmware upgrade, either manually or automatic. And my GV is not working. Not sure what I should do. Any ideas on how to trouble shoot. No response from support on this.
drgeoff:
No it is not EOL.
Have you tried the easiest method? Go to your dashboard at obitalk.com and click the yellow triangle against your 1032.
suresh33:
Yes, thats not working either
suresh33:
Here is my device configuration as shown in the status
HardwareVersion 1.3 help
SoftwareVersion 5.0.0 (Build: 2436) help
SystemTime 10:11:35 12/10/2017, Sunday help
UpTime 0 Days 1:31:32 (6) help
I have tried, automatic update using yellow triangle in obitalk
I have tried the manual update using the yellow triangle and pressing cancel
I have tried ***6 update on phone
I did a factory reset to update using above three.
I am now running out of options to figure out how to update. My software version appears pretty old too based on the forum topics. Is there an intermediate version I need to update before the latest update would work?
azrobert:
Download FW here:
http://fw.obihai.com/OBiPhone-5-1-7-4666EX.fw
Log directly into the OBi1032 using the local interface.
Key the IP address of the OBi1032 into a Web Browser and hit Enter
The UserID and default Password are both "admin".
Click System Manage then Device Update
Under Firmware Update click Browse and find the downloaded FW
Click Update
Navigation
[0] Message Index
[#] Next page