No dial tone OBI202

(1/3) > >>

dcuste:
Everything was working great.

I was reading this tread. ...  http://www.obitalk.com/forum/index.php?topic=13113.msg84139#msg84139
and checked that my device already updated itself. Great. but then I read in that same tread.....  "I recommend using the Google DNS because a) its very fast, and b) it won't annoyingly re-direct you to some domain selling website or search engine.

Note that the two DNS servers are 8.8.8.8 and 8.8.4.4"

So I logged onto my OBI202 as an admin and changed DNSServer1 from 209.18.47.62 to 8.8.8.8 and DNSServer2 from 209.18.47.61 to 8.8.4.4

I then hit the reboot on the upper right hand corner of the page and then refreshed. Everything looked good but now I have no dial tone on either SP1 or SP2. I disconnected the power to my modem, router and OBI202, waited 15 seconds plugged everything back in. Still no dial tone to either phone.

I changed the DNSServers back to what they were originally and rebooted from the web page. NO dial tone. Unplugged everything, waited, plugged everything back in. Still no dial tone. Anybody have any ideas what I can should do next?

GPz1100:
What does the status page in the obi indicate?

dcuste:
System status all look good. DNS are the 8.8.8.8 and 8.8.4.4. Otherwise it all back how it was.

GPz1100:
What about Phone port status?  Compare both on and off hook.

dcuste:
Phone port status is completely blank except last call information has a phone number following a " and a space. Under the tone profile page for dial tone it lists 350-18,440-18;20. If that make any difference.

Navigation

[0] Message Index

[#] Next page