OBi110 to OBi200 ... alittle help pls

<< < (2/2)

Redw00d:
ok, ... a headcold Isn't helping my thinking today...but, I'll try

so, do I, hook Both OBi110, and OBi200 to my router?

on, OBi110, line from landline? phone, to OBi200? .. OBi200 phone From OBi110 phone?

I do NOT know or use my google phone #... all friends/family call my landline number... I just want, the land line number to Ring, and answer, on my cordless phones (as befor) ... now, I can call OUT with them, but, I can ONLY answer calls on my stationary landline phone..

I do appriciate all help, sorry its kinda confusing to me, HOW DO you all understand this stuff? rocket scientists for a living? Hope my explaintions/requests are clear enough... thanks so much!

drgeoff:
Both OBi110 and Obi200 plugged in to router.

Landline plugged in to Obi110.

Phone plugged in to Obi110.

GV service deleted from OBi110.

GV service added to OBi200 on SP4.

The following is copied from azrobert's initial post in the thread I referenced, with OBi100 changed to OBi110.

After defining GV on the OBi200, use OBI Expert to change the routing rules.

OBi200

Define the OBi110 GV account on SP4

Voice Services -> SP4 Service -> X_InboundCallRoute: pp(200222222)

Voice Services -> OBiTalk Service -> InboundCallRoute:
{200222222:sp4}

Replace 200222222 with the OBi number of the OBi110 in both above places.

OBi110.

Physical Interfaces -> Phone Port -> OutboundCallRoute:
The 1st rule is: {([1-9]x?*(Mpli)):pp}
Change it to: {(<510111111*>(Mpli)):pp}

Replace 510111111 with OBi number of the OBi200

Voice Services -> OBiTalk Service -> InboundCallRoute: ph

I have not actually tested the above so maybe wait for azrobert to cast his beady eyes over it.  :)

Redw00d:
as Hard as I try.. OBi Expert, won't let me enter any typing... I feel I am Close... but, no cigar...

ok, rebooted pc, still Can't type to change settings but...

phone IS working now how I want, will it last? I dunno, but, its enough of a headache for today,

thanks so much for the help getting me this far... hope others can benefit

drgeoff:
You must clear any ticks in both boxes at the right hand end of the line you want to change.  Then click on 'Submit' at the bottom of the page and wait for your OBi to reboot automatically

Redw00d:
thanks again drgeoff, I got that now... but

its Working! do I dare, mess with success? kinda afraid to... I'll let you know...

Navigation

[0] Message Index

[*] Previous page