Keep getting Unable to configure device error!!

(1/2) > >>

deluxman:
I purchased an OBI200 to replace my old Obi100 device. Was able to get the new device connected and removed my old one in my Obi account. When I try to setup my Google Voice, I keep getting an error saying cannot configure device. My power LED is solid green. What step am I missing here?

SteveInWA:
Well, that's a new one.

Is this a brand new OBi 200, purchased from Amazon or Newegg, or did you get it used from eBay or elsewhere?  Did you make any configuration changes at all to the device before you added it to the OBiTALK dashboard?  For that matter, did you successfully add it using the **5 method, and you can successfully make test calls to the **9 222 222 222 echo test?

deluxman:
Yes, purchased new from Newegg a few days ago. Yes, able to  successfully add it using the **5 method, and can successfully make test calls to the **9 222 222 222 echo test

SteveInWA:
Thanks.

So:  I just now tested adding one of my Google Voice test accounts to one of my OBi devices, and it worked properly.  I'm wondering if it was just a momentary system outage when you tried it.

Try this:  Using Google Chrome browser on a laptop/desktop computer, not on a smartphone or tablet, press Ctrl-Shift-N to open an "incognito" browsing window (or, on Firefox, press Ctrl-Shift-P).

Sign into only the one Google account that holds your Google Voice inbound number.  Confirm that you see the number on the web page.  Leave that window open.  Press Ctrl-T to open another tab in that incognito/private browsing window.  Log into OBiTALK.  Click the 200 device.  Delete any previous SP configuration, then click the desired SP1-SP4, and click the button to set up Google Voice.  Follow the steps.  Make sure that the pop-up shows the same Gmail account as in the other browser tab.  Does that work?

deluxman:
Same message: Cannot configure device using the method you suggested.

Navigation

[0] Message Index

[#] Next page