News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Making long distance calls

Started by turuncu, January 02, 2018, 07:36:35 AM

Previous topic - Next topic

turuncu

I have a obi 202.  I have set up google voice with no problem.  What I would like to do is.  All local calls go through google voice and all international calls go through a different voip provider.

I would like it so the when the user dials 011 obi routes the number to that voip provider(betamax).  I don't need to receive any calls from this voip it will only have outgoing calls.  

Thanks for your help.

azrobert

Use OBi Expert to make following change

Physical Interfaces -> Phone1 Port
Add the following to the beginning of the OutboundCallRoute:
{(011xx.):sp2},

The above assumes Betamax is defined on SP2.
If needed, do same for Phone2

turuncu

Thanks.  I will try this when I get home.

turuncu

Quote from: azrobert on January 02, 2018, 10:39:47 AM
Use OBi Expert to make following change

Physical Interfaces -> Phone1 Port
Add the following to the beginning of the OutboundCallRoute:
{(011xx.):sp2},

The above assumes Betamax is defined on SP2.
If needed, do same for Phone2


Hi Azrobert.  this did not work.  After putting this code.  I can not make local or long distance calls.  I get a message the number you dialed xxxxxx has not received a response from the service provider.  Can you help.

Thanks

drgeoff

Post what you have now as the OuBoundCallRoute for the relevant phone port.

turuncu

Quote from: drgeoff on January 08, 2018, 01:35:04 AM
Post what you have now as the OuBoundCallRoute for the relevant phone port.

Thanks for your help.  I have reset the device and set up GV and betamax and put the dial rule again and it worked.  The only thing I had to do was to uncheck Phone Line 1 from the SP2. Without it everything when through the SP2.  It seems to be working now.  Thanks.