My new requirement

(1/3) > >>

kingrocks:
Hi, I have Obi 110 and I already have google voice set up(line1). Now my calling cards allow to call Switzerland unlimited from one number only i.e from cell phone or landline or office number only. I some how want to use Obi110 as a voice gateway and once I dial a google voice number it will allow me to dial the calling card number and then followed by the destination number.I have OOMA and OBI110 at home.
Can anyone give some suggestions?

Thanks

RonR:
Is it your OOMA that you want to be placing the call to your calling card from when you're calling in through Google Voice?

For example:

Cell phone -> Google Voice -> OBi110 -> OOMA -> Calling card number

kingrocks:
Ron,

I want to use OOMA or a google voice which ever is simpler. But I can register only 1 phone number with my calling card number.

RonR:
You can connect the OOMA to the LINE Port of the OBi.  You can then set the OBi to use either SP1 (Google Voice) or the OOMA as your default line (PrimaryLine) when making calls from the OBi PHONE Port (the other line can be selected using **1 (SP1) or **8 (LINE Port).  Incoming calls from both the OOMA and Google Voice would normally ring the OBi PHONE Port.

If there's only a few numbers that are to be allowed to call the Google Voice number and place outgoing calls, those specific numbers can be sent to the OBi Auto Attendant and all others will ring the OBi PHONE Port directly (callers who reach the Auto Attendant can make outgoing calls or be connected to the OBi PHONE Port).  Or ALL callers to the Google Voice number can be sent to the Auto Attendant.

If you give me your preferences, I'll try to assist you with the configuration.

kingrocks:
Ron,
Thanks for assisting on this. I want to use google voice. .Now I want to give 2-3 numbers only to make outgoing calls. I already have a google voice setup. Can I make use of this or need to use other google voice number?

Thanks

Navigation

[0] Message Index

[#] Next page