Obi202 / Twilio SIP - Too many bindings for a registration endpoint
drgeoff:
I assume you are not making the "schoolboy error" of using both the portal and the device's on board web server UI to configure your OBi202.
mattp:
Using obi-expert within the web portal. Could that be the cause of the problem? Happy to be pointed in a better direction. Thanks.
drgeoff:
Quote from: mattp on April 03, 2018, 11:23:24 am
Using obi-expert within the web portal. Could that be the cause of the problem? Happy to be pointed in a better direction. Thanks.
No, that's not the cause of the problem
mattp:
Spent a little more time looking at this today. Adjusted a few more obi-expert settings I thought might help.
Looks like the expiration is set right (900secs/15min) from inspecting the active registrations on twilio.
However it also looks like the Obitalk202 is trying to register every 20 seconds (creation time stamps for sip registrations 20 seconds apart).
I started thinking maybe the Obitalk box was retrying on failure too much, so spaced that out (although if everything else is working, that shouldn't be an issue).
Also thought if the expiration on twilio's end was out of sync with that on obitalk's end...then obitalk tries to re-register because it thinks it doesn't have a valid registration anymore...but twilio still has those registrations as active.
Anyway, the settings don't seem to have any effect. Still getting lots of errors in the twilio console related to this.
Happy to have other ideas.
mattp:
This is still an issue. I gave up on using the obi202 for the last year because of the issue.
Took another crack at getting it back online today and discovered my IP is now blacklisted by twilio because of too many registration requests! :)
Before I ask twilio to remove me from the blacklist, I need to get this resolved...plus I need the phone working now more than before.
1) Anyone else using an Obi20x box with twilio sip registration? If so are you having the same problem? Anyone willing to share configs (sanitized of course) so I can diff them and try to figure out the root cause?
2) Any recommendation on using the portal vs just ditching the portal and using the box web interface directly (eg missing features, more stable, etc)?
Thanks!
Navigation
[0] Message Index
[#] Next page
[*] Previous page