Obi100 -> Obi200 Issues
tazmo8448:
I've tried all the resets an reboots (wishing against hope) BUT
incoming calls on Obi200 are still showing UNKNOWN even though I've changed them to show a 1 in front of the Area Code....
Incoming calls on Obi200 are going to have to have the 1 removed I'm afraid...to work correctly
looking at the caller ID Method listed it shows the default as
FSK(Bell202) with a drop down list for FSK(V.23) and several other countries.
don't see a code there to be able to insert scrubbing the 1 off.
the CidNoNameFormat lists three types
Show Code O
Show BLANK
Show Caller Number
none of which show a way to be 'tweaked'
The only other reference to CID is a check box (under Calling Features)to enable which is enabled by default (no codes to tweak)
I think this is something the Obi Firmware will have to address
tazmo8448:
I'm really starting to think that it all boils down to Obi now wanting people to have the Obi Extras deal so they can charge monthly fees to do the things that use to be included. #1 was having CID now it seems it's listed as an EXTRA
way to go Obi....squeeze that dollar.
GPz1100:
What was your outcome after you added to the respective SPx slot?
Voice Services > SP1 Service > X_InboundCallRoute:
{(<1:>@@.):ph},{ph}
tazmo8448:
Well I spent several hours looking in Voice Services seeing nothing that even resembles a code that can be 'tweaked'
there really isn't anything relating to that except check boxes and those don't have drop downs to look at or change.
...then looking at the advertising for Obi200 see that CID is offered as a paid service under 'Obi Extras'
of course none of this was said when they announced the end of Obi100 and that the new Obi200 would be a replacement because of the new Google Chrome update (that changed the code used) when and if the ticket I sent on the subject is answered I will report those findings....have a friend that just got the Obi200 also and his calls all show UNKOWN CALLER so I'm sure it's a PAID service now. Will check with dslreports an see what they have to say.
GPz1100:
You're looking for X_InboundCallRoute in the path specified above. That's the parameter name. You modify its parameter to "{(<1:>@@.):ph},{ph}" (without the quotes).
Are you saying your obi1xx does not have this parameter?
You still haven't confirmed what called id number your phone actually shows, and if you have your stored numbers with or without the 1. Can't help you further until these are clarified.
Navigation
[0] Message Index
[#] Next page
[*] Previous page