New firmware for Obi 200/202
scottsal:
No, there's no dial tone and so the numbers that I dial are probably not going anywhere. I may just have a unit that has given it up.
drgeoff:
Quote from: scottsal on May 24, 2018, 12:53:07 pm
No, there's no dial tone and so the numbers that I dial are probably not going anywhere. I may just have a unit that has given it up.
Check that the phone and cord are not the problem. Either try with another phone and cord or take your phone and cord elsewhere to a known working phone socket.
If you prove the phone and cord are not the problem, then the OBi is kaput. An Obi only requires power to give dial tone. Doesn't even need an ethernet cable plugged in.
Did you ever have the OBi connected to house phone wiring? Never do that unless the house wiring has definitely been properly disconnected from any external phone service wiring
scottsal:
Thanks I'll give that a try after the weekend and report back. Funny thing is I just saw an offer come across for a new 200 for 34.99- I'll most likely go for that just in case.
scottsal:
As a follow-up, it was indeed the phone. I still haven't received any of the new firmware updates, but the new phone and a factory reset seemed to do the trick. Thanks to all for your expertise!
LingYang:
Can someone (hero) from this forum post the link to most current firmware for OBi5xxx, I believe it is 4.05 (Build 5903EX) TIA.
Navigation
[0] Message Index
[#] Next page
[*] Previous page