September 22, 2020, 12:45:19 am *
Welcome, Guest. Please login or register.
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
Author Topic: OBI202 fails firmware updates  (Read 12077 times)
Posts: 1

« on: January 10, 2018, 03:34:02 am »


I woke up this morning to find my OBI202 flashing the power light red/green. I know this is supper be from an interrupted firmware update.  However, I have automatic updates disabled because my OBI202 fails updating last a certain version.  I don't remember offhand which one but I've learned to keep a copy on my PC, since it was hard to get the last time this happened. Now I have to go through the process of doing a reset and reload the latest firmware that works.

My questions are 1 - how do I keep Obi from forcing an update on me? and 2 - why does Obi have firmware updates for an Obi202 that don't work on all Obi202s?

Hero Member & Beta Tester
Posts: 6164

« Reply #1 on: January 10, 2018, 10:00:02 am »

There is no such limitation (all OBi 202s use the same firmware,  regardless of age).  There's no way to know why yours is failing.

About all I can suggest is that you perform a "paper clip" factory default restore.  If that fails, and you can't update to the latest firmware, then you have a hardware issue (bad OBi).

Hero Member
Posts: 551

« Reply #2 on: January 11, 2018, 04:49:19 pm »

1 - how do I keep Obi from forcing an update on me?

System Management >> Auto Provisioning:
Auto Firmware Update >> Method: Disabled
ITSP Provisioning >> Method: Disabled
OBiTalk Provisioning >> Method: Disabled

Voice Services >> OBiTALK Service:
Enable: (Unchecked)

Pages: [1]
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC