SIP phones no longer connected after 3.2.1 (Build: 5794EX) Saturday 1/21/18

<< < (6/13) > >>

BlakeN:
Quote from: azrobert on May 10, 2018, 06:12:31 am

If your IP phone can call without registration, just uncheck X_Proxy.
Inbound calls can't be routed to local_client, use the IP address of the phone.



Thanks for the response.  Where does the IP address of the phone go?

azrobert:
Change the X_InboundCallRoute of your provider to:
ph,spx(AuthUserID@xx.xx.xx.xx:port)

spx is the SP number where X_Proxy was checked
AuthUserID is the Auth UserID of the Cisco phone
The rest is the IP and port of the phone
You don't need ":port" if the port is 5060

I've played with X_Proxy yesterday and Softphones Phonerlite on a PC and Zoiper on a smart phone register to my OBi200, but CsipSimple on an Android and an OBi110 fail.

BlakeN:
Quote from: azrobert on May 10, 2018, 06:36:30 am

Change the X_InboundCallRoute of your provider to:
ph,spx(AuthUserID@xx.xx.xx.xx:port)

spx is the SP number where X_Proxy was checked
AuthUserID is the Auth UserID of the Cisco phone
The rest is the IP and port of the phone
You don't need ":port" if the port is 5060

I've played with X_Proxy yesterday and Softphones Phonerlite on a PC and Zoiper on a smart phone register to my OBi200, but CsipSimple on an Android and an OBi110 fail.


Thanks for the details.  Does not seem to work for me.  Made changes and also on the Cisco phone side changed register to no and make and Rx calls without reg to yes.  I get green on the line but fast busy when trying to dial.

BlakeN:
Anyone have the firmware 5757EX for Obi200?  I have seem to lost it and the Obi site does not seem to be responding.

ProfTech:
To BlakeN: I have 5757EX. PM me and I can send you a link. I thought Obi fixed it so you can't downgrade but I've never tried.

Navigation

[0] Message Index

[#] Next page

[*] Previous page