Support Click-to-Dial Applications

<< < (2/2)

mikefoley:
I would love to see this functionality.

psichel:
Has there been any progress on allowing click-to-dial through a web API on the OBI202 or similar devices?

Thanks!

Ostracus:
WebRTC?

giqcass:
Unfortunately Obi100 and Obi110 do not support WebRTC however a 2xx series with Obiline adapter should work fine.  I have used WebRTC to make outgoing calls on my Mac via the browser using my Obi as a gateway.  An Obi2xx series with Obiline adapter should allow you to place outgoing calls over your landline directly from your computer.  Navigate the menu and set the Auto Attendant 1 PrimaryLine on your Obi2XX with Obiline adapter to use your phone Line.  

Voice services
>>>>>>>>>>>Auto Attendant
>>>>>>>>>>>>>>>>>>>>>>>>>Auto Attendant 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>PrimaryLine

Now from the Obitalk dashboard click on your Obi softphone settings and select the Obi you set up with the Obiline adapter as the OBi Voice Gateway.

Once this is done you can use WebRTC to dial a number directly from any WebRTC capable browser when logged in to Obitalk.  I have even used the Chrome browser on Android.

This could be accomplished on the Obi110 without WebRTC if you established a sip connection to the Obi110.  There are web based Sip clients you can use or better yet just download a Sip client to your device.
I used to use http://www.flaphone.com from my browser but there is some issue right now.  I don't know how long it's been down or if it's a temporary issue.  With a little setup you could have full incoming and outgoing on almost any device using an Obi110 or Obi2xx with Obiline adapter as a gateway.

Navigation

[0] Message Index

[*] Previous page