July 19, 2018, 10:24:25 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Obi 202 - What internet speed to work properly?  (Read 5926 times)
Taiwanese
Newbie
*
Posts: 6


« on: January 31, 2018, 09:38:51 pm »

Our office has slow DSL at about 5mb.  Assuming 3 other computers just use basic email etc not watching video.

Is this fast enough for Obi 202 with 2 GV lines?
Logged
SteveInWA
Hero Member & Beta Tester
*****
Posts: 4741



« Reply #1 on: January 31, 2018, 10:20:35 pm »

The raw speed is not the issue.  The issue is that VoIP phone calls rely on an uninterrupted, good quality connection.
 When you watch a video online, it is nearly all downstream data (from the video server to your computer), and the data is buffered on your computer (like filling up a water tank, and then draining it out while refilling it, which can hide temporary loss or delays of transmission).  VoIP can't be buffered more than about a quarter of a second's worth, before it would drive you crazy, talking over each other.

DSL is asymmetric.  That means, while you may get something under 5Mbps (it's never as fast as advertised) downstream speed, the upstream speed is likely much lower, like 256Kbs, or 1Mbps.  With other computers in use, if someone is doing gaming or videoconferencing, the upstream bandwidth will be sucked dry, and your outbound part of the call (you talking to the other party) will break up or be severely distorted.  I don't recommend that sort of connection for a multi-user office, but you can certainly try it yourself and upgrade your service if necessary.
Logged

Taiwanese
Newbie
*
Posts: 6


« Reply #2 on: February 01, 2018, 09:58:55 am »

Steve,

Thanks for the replay.

I just did a test on speedtest.net
Down load is 5.81 Mbps
Up load is 0.86 MBps

Too slow?

The problem is that this is the fastest I can get.  There is no other service except satellite.
Logged
SteveInWA
Hero Member & Beta Tester
*****
Posts: 4741



« Reply #3 on: February 01, 2018, 02:33:06 pm »

A single VoIP telephone call uses just under 100 Kpbs (kilobits per second) on that 860Kbps uplink.  So, in theory, it will work fine.  However, as I explained, other uses of that same uplink on your local network may compete for that bandwidth.  You will just have to try it and see if it is acceptable to you.
Logged

Taiwanese
Newbie
*
Posts: 6


« Reply #4 on: February 01, 2018, 02:38:47 pm »

Thank you.
Logged
RaytaNYC
Newbie
*
Posts: 13


« Reply #5 on: February 01, 2018, 05:57:42 pm »

I believe that the 202 can act as a router so that priority can be given to your VOIP calls.

Take a look and see if there are two Ethernet jacks.
1 for incoming and one for outgoing to balance of your office devices.
If so VOIP would get preference.

If I am wrong, I invite correction
Logged
Taiwanese
Newbie
*
Posts: 6


« Reply #6 on: February 01, 2018, 07:12:31 pm »

Any one tried using Hotspots from Verizon or T Mobile for Obi202?
Logged
joffrey
Newbie
*
Posts: 1


« Reply #7 on: March 20, 2018, 08:11:39 pm »

VoIP phone calls rely on an uninterrupted, good quality connection
Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC