How do you set an Obi 200 to full duplex?
RobertThompson:
Hello:
How do you set an Obi 200 to full duplex?
Thanks,
Rob.
drgeoff:
In your browser go to google.com and enter the following search string
site:obitalk.com full-duplex
Then look at the posts that are listed.
ProfTech:
When you do the site search as above it doesn't come up with anything. I've wondered if the 200 had an equivalent setting to the 110 but never have heard or seen anything on the forum about the 2xx series. The lights on my router show 100 mb speed but I'm not sure if it makes any indication to full or half duplex. I guess I just assumed it was modern enough it is probably 100/full.
drgeoff:
Quote from: ProfTech on February 11, 2018, 09:43:19 am
When you do the site search as above it doesn't come up with anything.
See the attached screenshot which is at complete odds with Proftech's assertion of "doesn't come up with anything".
The first result is https://www.obitalk.com/forum/index.php?topic=3788.msg25147#msg25147 which has the required info.
GPz1100:
Why would one need to mess with the duplex setting at all? Mine default to full duplex without have to change anything. I did try playing with option 27, but it reverted to full duplex regardless of the settings (0, 1, or 2).
obi202 - port 2 (physical port 3)
obi200 - port 2 (physical port 3), port 3 is a pc in sleep mode
Navigation
[0] Message Index
[#] Next page