Can Programmable Keys call out through OBiLINE?

<< < (3/3)

azrobert:
S1 shouldn't have any effect, but you can try it if you want. After you dial a number there is normally a 2 second delay. The S1 will change it to 1 second.

You said Line is your primary line, so try this setup:

Function: Speed Dial
Service: blank
Number: 8005551212

Edit:
When you specify a service the call bypasses the dial plan and is routed directly to the trunk. When the service is blank the dial plan will process the call and since your primary line is PSTN the call will be routed to Line.

I just noticed OBiHai suggested the service should be set to SP1. I don't understand why.

TulsaMJ:
To be 100% clear: traditional Speed Dials work fine with my OBiLINE. What I'm trying to figure out is how to set up Programmable Keys to speed dial out through my OBiLINE. I can easily set up Programmable Keys to dial out through Google Voice or my work SIP line (Vonage), but for some reason I can't speed dial a number using a Programmable Key and have it go out through the OBiLINE. It feels very much like a software glitch.

I think the question that I need to answer is what is different between a Speed Dial call, and a call from a Programmable Key using the PK's "speed dial" functionality. This should be ridiculously simple, and shame on OBiHAI for not having an answer for me through their tech support people.

TulsaMJ:
I FOUND MY SOLUTION!

In the expert setup, I set function to "Speed Dial" and put the normal 10-digit number in Number, but in "Service" I just selected the "blank" option - no service. Since OBiLINE is my default service, it uses it with no fuss at all! It's a tad slow, but I think I can live with that! (Why didn't OBiHAI Tech Support just tell me that?)

Problem solved! W00T!

azrobert:
Quote from: TulsaMJ on March 09, 2018, 09:45:04 pm

I FOUND MY SOLUTION!
In the expert setup, I set function to "Speed Dial" and put the normal 10-digit number in Number, but in "Service" I just selected the "blank" option - no service.

If you had read my last post, you would had the solution 2 days ago.

Navigation

[0] Message Index

[*] Previous page