Can Programmable Keys call out through OBiLINE?
azrobert:
**8 on an OBi110, not an OBi10xx is used to route calls to line.
Below is a copy of my OBi1032's Phone DigitMap and OutboundCallRoute. **8 is used to route calls to Bluetooth and **70 is used to route calls to line. I think OBi support had one too many last night.
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|***|**0|#|##|**70(Mli)|**8(Mbt)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**6(Msp6)|**9(Mpp)|(Mpli))
{([1-9]x?*(Mpli)):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**6:>(Msp6)):sp6},{(<##:>):li},{(<**70:>(Mli)):li},{(<**8:>(Mbt)):bt},{(<**9:>(Mpp)):pp},{(Mpli):pli}
TulsaMJ:
I just tried all of these:
**89185551212
##709185551212
##9185551212
**8;send=S9185551212
##7;send=S9185551212
##;send=S9185551212
**70 is definitely the right code for my phone, but no matter what line I start with, it never works. I have the OBiLINE, my Google Voice, and a Vonage SIP line. I also have a CallCentric account hooked up, but I haven't bought a number so I can't actually dial out through that one.
I'm going to compare my configs to what you posted, azrobert. Maybe I can figure out some tweak that will help.
azrobert:
It should be **709185551212
What happens when you enter ## on the keypad and then take the phone off-hook? You should get dial tone from line.
In OBi Expert go to Status/Phone and Line Status
What is the Line status?
I don't have an OBiLine, but my OBi110 shows:
State: On Hook
LoopCurrent: 0 mA
TipRingVoltage: -49 V
TulsaMJ:
Quote from: azrobert on February 22, 2018, 08:05:53 pm
What happens when you enter ## on the keypad and then take the phone off-hook? You should get dial tone from line.
I get the dial tone, but that doesn't really prove anything - OBiLine is my default line if you just take it off hook.
Quote from: azrobert on February 22, 2018, 08:05:53 pm
In OBi Expert go to Status/Phone and Line Status
What is the Line status?
I don't have "Phone and Line Status" in the Status section of my OBi Expert screens. There's a Status | System Status, and it has entries for SP1, SP2, etc., OBiBt Dongle, and OBiTalk service, but interestingly enough, nothing for OBiLine!
I haven't heard back from support in a couple of days. Starting to wonder how much their support people actually know about their own hardware. :(
TulsaMJ:
I've started wondering if this might be a dial plan problem. It may be as simple as adding an S1 to the dial plan for li, something like that. I will have to experiment a little to see what I can figure out - does this ring a bell for anyone?
Navigation
[0] Message Index
[#] Next page
[*] Previous page