Entering additional numbers after the phone#
MarkNY:
I'm using obi200 with GoogleVoice to dial in to my business conference calls. I need to dial a phone number and then an additional meeting number (6-9 digits+#, then 4-6 digits PIN+#).
It doesn't seem to be working. even though I carefully enter the entire number, it seems to recognize only up to 4 digits.
for example: I dial my conference line: +1-888-111-2222, then I hear an announcement from the bridge and need to enter the meeting number: 123456#, then my PIN. When I enter the last # sign, I get an error announcement saying that I entered incorrect meeting number and tells me that I entered: 1256.
Is there any additional configuration I need to do?
SteveInWA:
I can't think of a reason why it would recognize some, digits. It should either recognize all, or none.
Perhaps you have a bad telephone. Try swapping it out.
If that doesn't work, and since these are free calls for you, I'd suggest using some other VoIP service provider for these calls.
chilirock:
MarkNY,
Here's a test phone number you can call to test DTMF tones, among other things: 1 (631) 791-8378. When you first call the number you will be asked to record a test message and then press "#". After you complete the first test, you will be presented with an IVR menu of several other tests including DTMF, Option 2 and real-time DTMF read back, Option 8. See if your # key is recognized by the tests.
MarkNY:
I tried this test line with two different phones and even # was not recognized.
Taoman:
Quote from: MarkNY on February 25, 2018, 10:40:46 am
I tried this test line with two different phones and even # was not recognized.
Try changing your DTMFMethod to InBand. If that doesn't work, try some of the other options.
Service Providers-->ITSP Profile X-->General-->DTMFMethod
Note: Must uncheck both boxes to the right of the field before editing and then submitting and saving your changes.
Navigation
[0] Message Index
[#] Next page