Can't dial International numbers
N7AS:
I want to call International numbers going out SP2 so I added
{011xx.:sp2}, to the beginning of my Phone PORT > OutboundCallRoute.
Just as a test, when I dialed my iNum number using the format 011 883 5100 xxxx xxxx I got a message saying "The number 0118835100xxxxxxxx was rejected by the service provider. Reason 480".
I can dial this number through a voice gateway ok.
When I dial a UK number 011 44 etc. nothing happens.
Where have I gone wrong?
RonR:
{011xx.:sp2} would send '011xx.' out the SP2 trunk. Embedded DigitMaps must be enclosed in parenthesis.
While placing such a rule in the OutboundCallRoute wouldn't be my first choice, what you're looking for is {(011xx.):sp2}.
N7AS:
I tried that and had the same results. That error message was actually "reason 484" whatever that means.
RonR:
484 means 'Address Incomplete' (whatever that is :) ).
What does your Call History show as the number sent out SP2?
N7AS:
Here is what I have:
Call 4 08/18/2011 18:03:02
Terminal ID PHONE1 SP2
Peer Name
Peer Number **2011883510008268993 011883510008268993
Direction Outbound Outbound
18:03:02 New Call
18:03:09 End Call (484 Address Incomplete)
and here is one I tried to a UK number that didn't go anywhere (no error message)
Call 2 08/18/2011 18:05:40
Terminal ID PHONE1 SP2
Peer Name
Peer Number **20114401664485020 0114401664485020
Direction Outbound Outbound
18:05:40 New Call
18:05:45 End Call
Navigation
[0] Message Index
[#] Next page