Keep getting call from YM-OBi-O????

<< < (2/2)

RonR:
Every OBi has a 9-digit OBiTALK number thst can be called from other OBi's or OBiON Apps.

I don't recommend it, but if you really want to disable it:

Voice Services -> OBiTALK Service -> Enable : (unchecked)

P2P1 is the OBiTALK service.

jimates:
YM-OBi-O-1166?? is the name given to the othe Obi by the owner. Your call log shows the numbers the calls are coming from. You can block the individual numbers without disabling the service.

QBZappy:
w84no1

OBiTALK Service->Enable = uncheck both check marks

This will shut the OBitalk service. However I think it will also shut you off the OBi portal service, any auto provisioning you may want to enable, remote firmware updates from OBi, ect...

Another way is just to block all calls from OBis. Obis seem to start with 2 and 3, using a variation of what RonR suggested you could setup a comprehensive call block.
Voice Services -> OBiTALK Service -> InboundCallRoute : <- insert rule here



P2P1 is probably means peer to peer. Which is how the OBi is setup on their network.

Edit: Clarify

RonR:
Quote from: QBZappy on August 19, 2011, 08:21:38 pm

Another way is just to block all calls from OBis. Obis seem to start with 2 and 3, using a variation of what RonR suggested you could setup a comprehensive call block.
Voice Services -> OBiTALK Service -> InboundCallRoute :


A blank InboundCallRoute will not block any calls.  A blank InboundCallRoute sends all calls to the PHONE Port.

To block all incoming calls from the InboundCallRoute:

Voice Services -> OBiTALK Service -> InboundCallRoute : {@:}

w84no1:
Thanks guys.  I will just block the 2 numbers that have called for now.

Navigation

[0] Message Index

[*] Previous page