How to access POTS line (Line 2) with Obi212?
drgeoff:
Adding an OBi to your Dashboard and configuring it are different things. You can do the first without the second.
You would probably find that the problem you had (re-)configuring GV on the 110 doesn't happen now* as GV seem to have (temporarily?) reverted the server certificate changes they started making last autumn which prevented the OBi1x0 devices working with GV. There was (and will not be) any effect on SIP services.
Anyway, the azrobert method of using the Obitalk service requires no configuring except the InboundCallRoute setting he specified. If you still have the corded phone you can plug that into the 110 and keep the cordless one attached to the 212.
Easiest way to reset to defaults is to dial ***8 and follow the prompts.
(* or load the alternative firmware for the 110 which contains the additional new certificates. You can revert to the official firmware if/when you want to.)
azrobert:
If the GV setup failed, your OBi110 still should be registered to OBiTalk. Is the OBi110 listed on the dashboard?
It's been a long time since I registered an OBi device, but I think you get a pop-up asking if you want GV. You just decline.
You can try to use the green Call Button in OBiTalk to call the OBi110. Enter the OBi110's OBi number and click Call. I was just testing the Call Button yesterday and it was flakey. It only worked once, the 2nd try failed. I had to sign out and back into OBiTalk to get it to work again. Sometimes I had one-way audio.
webraider:
but once it's added, I can plug the 110 output into the Line In put of the 212, but can't I then ring the 110 online using my computer to call the OBI 110? (There's an option to call OBI). Just wondering.
webraider:
Quote from: azrobert on March 13, 2018, 12:34:22 pm
If the GV setup failed, your OBi110 still should be registered to OBiTalk. Is the OBi110 listed on the dashboard?
I deleted it completely.. Yeah I just looked and saw there is a box to uncheck. this should work. I'll try to then ust the green Call Obi button. If memory serves this willl ring the OBI, and then I can pick up the extension and hear some kind of message...
I'll do two tests and post the results..
drgeoff:
The green 'Call Obi' button has never supported OBi1x0 devices.
Navigation
[0] Message Index
[#] Next page
[*] Previous page