FXS to FXO and FXO to FXS

<< < (4/5) > >>

drgeoff:
Have you changed the CallerIDDetectMethod to FSK(V23)?  DTMF for Caller ID is not the norm in the UK.

Roddy:
Yes drgeoff, I did change to FSK(V23).

drgeoff:
Are you at the OBi110?  If yes, use the local web management interface to examine the Call History.  That will show if the incoming calls are having the Caller ID recognised and where they are being routed to.  Unfortunately you cannot access Call History using the portal.

And just to dismiss simple things.  Can you confirm that the PSTN line does have CallerID service?  For example that is a chargeable optional extra on BT lines.

I can confirm that I could not get UnconditionalCallForward nor the Unanswered version from PSTN to aa to work on my 110.  I can confirm that routeing incoming calls on the PSTN line from specific numbers to the aa does function as expected on my 110.

Roddy:
- I have a GSM to Phone Adapter Device and the GSM line has call waiting
   ( https://www.amazon.com/Phone-Adapter-Device-Dial-Tone/dp/B00HJM6K7E )

- I can use the PSTN/LINE to make **8  & receive (with caller ID) thru OBI 110 alright.

- It is when you call my SP1 (Google voice) and after 4 rings, for example, you want to get hold
   of my UK PSTN/LINE to make a local call in the UK.

- Routing incoming calls on the PSTN line from specific numbers to the aa does NOT function.

- I found this on VOXILLA;
   " If Google Voice works then you want to setup an incoming call to your PSTN line to go to the Automated    
   Attendant (aa). Setup the OBi110 Line Port InboundCallRoute to go to aa:
   Physical Interfaces --> LINE Port --> InboundCallRoute ... set to aa or {aa}

   Then you need to setup the Automated Attendant to dial on SP1 your GoogleVoice port:

    Voice Services --> Auto Attendant --> PrimaryLine ... set to SP1 Service

    I haven't tried it though!

drgeoff:
Now you tell us.  :(

That adaptor is more likely to supply US stye CallerID.  Set your CallerIDDetectMethod to FSK(Bell202).  Actually set all the parameters in that section back to default values.

Navigation

[0] Message Index

[#] Next page

[*] Previous page