FXS to FXO and FXO to FXS
Roddy:
PSTN to VoIP Gateway and VoIP Gateway to PSTN
My current setup
1- SP1: Google Voice
2- SP2: VOIP provider (for long distance)
3- Land line plugged into LINE port
OBI110 is in my home in the UK.
- I typically make and receive calls to/from the USA through Google Voice(SP1),
- And use my Voip International provider (SP2) to call International,
- And, use the handset to make and receive calls through my UK land line.
All I need now is to be able to configure my OBI 110 like how my ( SPA 3102 ) which i previously had, was configured and allowed me:
1- PSTN to VoIP Gateway
allows me to dial in from an external location, through the PSTN line and then dial out using
a VoIP provider, and configure the PSTN to VoIP gateway using a PIN number.
2- VoIP Gateway to PSTN
allows me to dial in from an external location, through the VoIP gateway and then dial out using
a the PSTN, and configure the VoIP Gateway to PSTN using a PIN number.
azrobert:
Service Providers -> ITSP Profile A General -> DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx)
Voice Services -> SP1 Service
CallForwardOnNoAnswerEnable: Checked
CallForwardOnNoAnswerNumber: aa()
CallForwardOnNoAnswerRingCount: 4
Voice Services -> Auto Attendant
AnswerDelay: 0
OutboundCallRoute:
{(Msp1):sp1},{([1-9]x?*(Mpli)):pp},{0:ph},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
UsePIN: Checked
Pin1: 1234
Physical Interfaces -> Line Port
DigitMap: (xx.S2)
CallForwardOnNoAnswerEnable: Checked
CallForwardOnNoAnswerNumber: aa()
CallForwardOnNoAnswerRingCount: 4
You need to use OBi Expert to make above changes.
To enter OBi Expert from the Dashboard click on the gear ICON to the right of your OBi110 then select OBi Expert Config, confirm and select Enter OBi Expert.
To navigate click on the titles with the + then click on a sub-title.
An example: click on Service Providers then click ITSP Profile A General.
To make a change BOTH boxes to the right of the value must be unchecked.
When all changes are complete on this page, click Submit at the bottom of the page.
OBiTalk will download the configuration changes to the OBi110 and reboot it.
Calls on SP1 or Line will be routed to the Auto Attendant after 4 rings.
After the prompt enter 2
You will be asked for a Pin
Enter 1234#
You will be asked for a number
Enter a number followed by a #
If it's a 10 or 11 digit US number, it will be routed to SP1.
All other numbers will be routed to Line.
If you want to use SP2 enter **2 followed by a number and #
Roddy:
Dear azrobert,
Thank you for your reply.
Testing the your configuration, I found the following by dialing from outside:
1- Dialing the SP1 number, after logging in I get SP1 dial tone to call USA number from google voice, which is not
really helpful, but;
2- Dialing the SP1 number, after logging in I also got SP2 option which allowed me to dial through my long distance
voip provider - perfect.
3- Dialing the SP1 number, after logging in I'm not given the option to dial through the UK landline.
3- Dialing the UK landline will not give my a prompt or allow me to dial USA numbers through the landline.
Therefore, what I exactly need to do is:
If anyone is given permission, they should be able to:
In the UK:
Call my local UK ( LINE ) number and access SP1 dial tone to the USA OR access SP2 dial tone to make international calls.
In the USA:
Call US local number ( SP1 ) and access SP2 dial tone to make international calls OR access my UK local number ( LINE ) to reach phones in the UK.
Once again, I thank you for your patience and help.
Kind regards,
Roddy
drgeoff:
Quote from: Roddy on March 13, 2018, 03:34:59 am
Dear azrobert,
Thank you for your reply.
Testing the your configuration, I found the following by dialing from outside:
1- Dialing the SP1 number, after logging in I get SP1 dial tone to call USA number from google voice, which is not
really helpful, but;
2- Dialing the SP1 number, after logging in I also got SP2 option which allowed me to dial through my long distance
voip provider - perfect.
3- Dialing the SP1 number, after logging in I'm not given the option to dial through the UK landline.
3- Dialing the UK landline will not give my a prompt or allow me to dial USA numbers through the landline.
Therefore, what I exactly need to do is:
If anyone is given permission, they should be able to:
In the UK:
Call my local UK ( LINE ) number and access SP1 dial tone to the USA OR access SP2 dial tone to make international calls.
In the USA:
Call US local number ( SP1 ) and access SP2 dial tone to make international calls OR access my UK local number ( LINE ) to reach phones in the UK.
Once again, I thank you for your patience and help.
Kind regards,
Roddy
I'm confused by your findings. :(
No matter whether you reach the OBi110 by the GV number or the PSTN number, if not manually answered within 4 rings the AutoAttendant should pick up saying "Welcome to OBi Attendant. Main menu ...".
You press 2 and are asked to enter the PIN followed by the # key. You press 1234# and are requested to enter the number you wish to call followed by #. You do so and are told to wait while your call is connected. At no stage should you hear dial tone.
The routing is done automatically. 11 digit numbers starting with a 1 and 10 digit numbers are sent to GV. Other numbers are sent to the PSTN line. Or use the usual **n prefixes to force calls to a specific one of your three service providers.
azrobert:
Make sure the AA's Primary Line is set to PSTN. Uncheck both boxes to the right of the value to see the real value. I didn't tell you to change this because PSTN is the default.
Voice Services -> Auto Attendant -> PrimaryLine: PSTN Line
Are you saying when you call the UK number it rings more than 4 times and you don't get the AA prompt?
If you are not getting the prompt, make sure you are at the current firmware level, build 2886. If you're not at 2886, here is the download:
http://fw.obihai.com/OBi110-1-3-0-2886.fw
Edit.
When you call the SP1 number, try dialing **8 followed by a UK number to send the call to Line. You shouldn't have to use a prefix, but maybe something isn't set correctly.
Go to Status -> System Status -> SoftwareVersion to see your firmware version
Navigation
[0] Message Index
[#] Next page
[*] Previous page