sip2sip.info Does not Work
Fred:
I setup a SIP account using sip2sip and tested the credentials using X-lite and it works just fine, incoming calls no problem.
I tried setting up on SIP 2 on the OBI100 and the OBI is responding with:
Register Failed: No Response From Server (server=81.23.228.140:5060; retrying)
In the setup I am using sip2sip.info as the server, port 5060 and my appropriate credentials. Again, X-lite works fine with this setup. I also disabled my firewall, still not working.
Any ideas? Is there a log file generated by the Obi that may tell me something?
RonR:
These are the only settings on SP2/ITSPB you should need to set:
Service Providers -> ITSP Profile B -> SIP -> ProxyServer
Voice Services -> SP2 Service -> X_ServProvProfile : B
Voice Services -> SP2 Service -> AuthUserName
Voice Services -> SP2 Service -> AuthPassword
Everything else on SP2/ITSPB can (and probably should) be at Default to get started.
Fred:
Thanks, RonR. Those are set through my ObiTalk account and they are the same values I have working in x-Lite.
Can the error "No Response from Server" have to do with the ObiTalk servers blocking sip2sip.info on port 5060? Just wondering what else it can be. I am still a newbie to the world of SIP.
Thanks for your help!
RonR:
Quote from: Fred on August 20, 2011, 01:19:31 pm
Can the error "No Response from Server" have to do with the ObiTalk servers blocking sip2sip.info on port 5060?
SIP and XMPP (Google Voice) don't go through the OBiTALK servers. The OBi is a standalone ATA except for the OBiTALK Voice service (for which Obihai supplies the server). Everything (even OBiTALK Voice service) works regardless of whether you sign up and use the OBiTALK Web Portal or not.
When I get done mowing the grass (there's an acre of it :( ), I'll sign up for a sip2sip account and see if I can get registered.
Fred:
Thanks, RonR. While you are mowing I'll keep working on it. If I come up with an answer I'll post here.
Thanks!
Navigation
[0] Message Index
[#] Next page