Obi200 + Google Voice = every other few inbound calls are dial tone

<< < (2/3) > >>

yazman:
I'm not an Obi guru, but I changed the values in te Obitalk configuration menu under physical interfaces phone 1.  Changed "onhooktipringvoltage" to 50 and "offhookcurrentmax" to 15 and now things seem to be working for me.  I don't know if the value of 50 will do any damage to the device, but at least it's working for now.

mikepanic:
Could you share where in the menu system that is? Can't find it anywhere

yazman:
in the Obi dasboard click on the gear wheel, where it say Obi extras.  A new screen will open and near the bottom there will be a selection for "Obi expert configuration".  Click on that then in the new page click on "enter Obi expert".  On the left of the new screen you'll see the option for "physical interphaces".  Click that then clck on "phone 1".  In the new screen you will find "port settings" and the area to change the values for the onhooktipringvoltage and offhookcurrentmax.  Just remember to hit submit at the bottom of the screen once you change the values.

mikepanic:
Thanks a ton!

I can get into that screen but I can't change the values  ???

drgeoff:
Quote from: mikepanic on March 16, 2018, 11:33:50 am

Thanks a ton!

I can get into that screen but I can't change the values  ???

Click in the boxes at the right hand end of a line until they are both clear.  Then you can change that parameter.

i doubt that it will have any effect on your problem, but nothing lost by trying.

Navigation

[0] Message Index

[#] Next page

[*] Previous page