On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT
OBi2182
OBi1022
Poly D230
OBi200
OBi202
OBi212
OBiWiFi5G
Started by RobertThompson, March 25, 2018, 10:33:21 AM
Quote from: drgeoff on March 25, 2018, 10:39:03 AMThat is the firmware version, not an IP address.
Quote from: drgeoff on March 25, 2018, 10:52:50 AMIs this an OBi202 or 212 or 302? All those models have a built in router and the defaults (which you have after a factory reset) are that the router is enabled and the onboard web UI is NOT accessible from the WAN port, only from the LAN port.If the above is the case you can enable access by dialling ***0. At the voice prompt dial 30# then follow the prompts to enter the new value 1 and save it.http://www.obihai.com/OBiDeviceAdminGuide#_Toc367543042