Obi508 set up with FreePBX Endpoint Manager not proper

<< < (2/2)

aMallicoatAuto:
I had to shut down and restart the server.

I am now auto provisioned and can log in. It looks like the IP addresses and ports have taken correctly, but it doesn't ring incoming calls.

azrobert:
You haven't explained the function of FreePBX with your setup. Anyway, you can call the ringer from any phone connected to the OBi508. This will eliminate or identify a routing problem. Just dial #x from any attached phone, where x is the port number the ringer is attached. If the ringer is attached to Phone Port 4, you would dial #4

Does the ringer ring?

aMallicoatAuto:
The function of the obi508 is as follows from the previous post. I also run cheap cordless phones with it.

"I have an automotive shop and its LOUD. So we have an old fashioned bell ringer that the 508 drives. We need to get this working soon so we're not missing calls."

#x does not ring the bell. it just gets the sound you would dialing the wrong number or something.

Navigation

[0] Message Index

[*] Previous page