Digimap issue

(1/2) > >>

bill-cary:
OBI200
A long time ago I set my digimap to this for all 4 ITSP profiles:
(*xx|1xxxxxxxxxxS0|<1919>[2-9]xxxxxx|<1>[2-9]xxxxxxxxxS0|011xx.|xx.|(Mipd)|[^*]@@.)
and it worked exactly the way I wanted it.

When I dial a number (usually an 800 #) and have to enter additional digits for the VRU, I want to be able to redial the #. The S0 terminates the redial after the 11th digit so the additional digits don't interfere with a redial.

Recently, it stopped working, but the digimap has not changed. When I do a redial of more than 11 digits I get the message "could not complete your call".

Problem #1, I don't remember why the (Mipd) and [^*]@@. are there. It may have to do with the fact I set my 100 to work thru my 200 when Google messed with the codes and I added it then along with other instructions.

Problem #2, That change wasn't that long ago and I don't know for sure when it stopped working, so maybe it has something to do with it.

Is my digimap correct for what I want to accomplish?

If it is, why has it stopped working?

azrobert:
It looks good to me. The Phone Port DigitMap can possible affect this. Have you made any changes to the default?

(Mipd) and [^*]@@. are used to match an IP address dialed as 0*192*168*1*100 and usually are not needed. It gets transformed to 0@192.168.1.100

There is another way to code the DigitMap. Try this:
(*xx|1xxxxxxxxxx|<1919>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|011xx.)

If the number can't match another rule after 11 digits, the OBi won't wait for more digits. The xx. in your DigitMap will match more than 11 digits, so you need the S0.

Edit:
If the above doesn't work, you can do an OBi redial by dialing *07

bill-cary:
this is what I have morphed to for my digimap = which still does not work to redial 11 of 12+ digits
(*xx|[2-9]11|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1919>[2-9]xxxxxx|011xx.)
what was originally dialed was 800xxxxxxx + xxxxx

when I hit redial all digits are redialed but apparently they are all also being transmitted because it cannot connect.

azrobert:
Please post your Phone Port DigitMap.

After you to a re-dial go to Physical Interfaces -> Phone1 Port

What is the LastDialedNumber?

bill-cary:
Phone port digimap is default:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli))

the LAST dialed number is not the 800 # with the extra digits, which is what I think you want to see. I'll have to try to recreate that at this point.
Is that # what is what is actually dialed by the OBI?

Navigation

[0] Message Index

[#] Next page