Google Voice1 from SP1 to Google Voice2 on SP2
azrobert:
If the caller wants to send the call to the OBi212 phone port, they should reply "1" to the Auto Attendant prompt.
You can selectively send calls to the AA based on CallerID. All other calls will bypass the AA and ring the phone port.
CallerID 18005551212 will be sent to the AA. All other callers will be sent to the phone port.
SP1 X_InboundCallRoute: {18005551212:aa},{ph}
If you want to send multiple caller id's to the AA, just separate them with a vertical bar.
SP1 X_InboundCallRoute: {18005551212|18005551313:aa},{ph}
hruk79:
Thank you. But I want very simple thing.
I am calling to my GV2 which is SP2 and this call is transmitted to GV2 (sp2) and GV2 is ringing. I want get call not on the ph, but on the GV2(sp2).
I tried
{:sp1} - do not work
SteveInWA:
This discussion makes no sense, thanks to your poor English language skills.
Here is how OBi devices work: you have four different Service Provider (SP1-SP4) configurations. You can configure each one of those four configuration slots with a different service provider -- Google Voice and/or some other service provider.
The OBi 212 has ONE phone jack. ALL inbound calls to SP1 through SP4 will ring the ONE telephone that is plugged into the OBi.
The other jack on the 212 is used to plug in a cord connected to some OTHER telephone service. You cannot plug a phone into that jack.
Assume you have two different Google Voice accounts, "A" and "B".
You configure A on SP1, and B on SP2.
When someone calls EITHER A or B, then the one and only one phone plugged into the OBi will ring.
There is no "forward SP1 to SP2". There is no point to that.
JLJL:
Quote from: hruk79 on April 19, 2018, 09:08:02 pm
I am trying to do the sipmplest thing:
A call to GV1 set on the SP1 and want it to be forwarded to GV2, but it always fails.
There is now answer from Obi212 when calling to GV1 on the SP1, it is only about four tones and then sp1 google voice box.
There is now even ring on my GV2.
My changes is very small, both of GV1 GV2 is set up automaticaly.
SP1
X_InboundCallRoute {sp2}
AnonymousCallEnable checked
SP2 {ph}
AnonymousCallEnable checked
Both of GV works in stardard mode:
If I change SP1 X_InboundCallRoute {sp2} to {ph} it takes my ring to GV1 and forwards to ph, along with it take my call to GV2 on SP2 and sends it the phone. I can speak and hear too.
Help me, please. Alexey.
I think I understand what you mean. Try this. 1234567890 = use your sp2 phone number.
SP1 X_InboundCallRoute:
{sp1(1234567890)}
SP2 X_InboundCallRoute:
{ph}
So when someone calls you at SP1 phone number it makes SP2 ring. This expands on what azrobert wrote here.
Quote from: azrobert on April 19, 2018, 10:58:14 pm
When bridging a call like that you need to supply a phone number.
SP1 X_InboundCallRoute: sp2(18005551212)
drgeoff:
Quote from: JLJL on April 22, 2018, 03:21:15 am
Quote from: hruk79 on April 19, 2018, 09:08:02 pm
I am trying to do the sipmplest thing:
A call to GV1 set on the SP1 and want it to be forwarded to GV2, but it always fails.
There is now answer from Obi212 when calling to GV1 on the SP1, it is only about four tones and then sp1 google voice box.
There is now even ring on my GV2.
My changes is very small, both of GV1 GV2 is set up automaticaly.
SP1
X_InboundCallRoute {sp2}
AnonymousCallEnable checked
SP2 {ph}
AnonymousCallEnable checked
Both of GV works in stardard mode:
If I change SP1 X_InboundCallRoute {sp2} to {ph} it takes my ring to GV1 and forwards to ph, along with it take my call to GV2 on SP2 and sends it the phone. I can speak and hear too.
Help me, please. Alexey.
I think I understand what you mean. Try this. 1234567890 = use your sp2 phone number.
SP1 X_InboundCallRoute:
{sp1(1234567890)}
SP2 X_InboundCallRoute:
{ph}
So when someone calls you at SP1 phone number it makes SP2 ring. This expands on what azrobert wrote here.
Quote from: azrobert on April 19, 2018, 10:58:14 pm
When bridging a call like that you need to supply a phone number.
SP1 X_InboundCallRoute: sp2(18005551212)
@JLJL
Please explain why this would be preferable to setting the X_InboundCallRoute of both SP1 and SP2 to ph.
Navigation
[0] Message Index
[#] Next page
[*] Previous page