Hi everyone, something funny its happening to my device.
Last Monday 2018-07-02 my OBi1062 stop working normally.
My config:
Sp1 - Google Voice -- Working OK
Sp2 - Sip Provider -- NOT Working
Sp3 - Sip Provider -- NOT Working
SP2 and SP3 is the same provider but different phone number, both can register without a problem.
If I receive a inbound call from SP2 or SP3, when I pick up the call, the phone immediately reboots.
If I place a call thru SP2 or SP3, the device immediately reboots when the other party pick up my call.
Last week everything works flawlessly on GV Sp2 and SP3
I called support to SP2/3 provider and everything its normal, and it is, because I configured my old OBi-110 with the same set up as should be on the OBi1062, but both lines work perfectly on the OBi-110.
The OBi1062 and OBi110 are on the same network, so I discard any problem related to the router.
The Obi1062 firmware installed is 5.1.11 (Build: 4858EX.1311) I don't know if this last weekend a new firmware update was push to the device.
------- PROBLEM UPDATE --------
I think that there's something wrong with the firmware 5.1.11 (Build: 4858EX.1311).
I already try the following and the problem persist.
-Factory Reset .
-Configure SIP provider, without configuring Google voice at
obitalk.com -Same Result, phone reboots when pick-up call, inbound or outbound.
My conclusion is that something wrong with the firmware 5.1.11, because I configured the same SIP provider configuration at an old OBi-110, and I also configure the same sip provider at a brand new out from the box OBi1062 with the firmware 5.0.0 (Build: 3131.1311), and on both devices the SIP provider works flawlessly; All devices are connected to the same network, so any LAN problem is discarded.
Thanks in advance for any help/suggestions.