Can't make or receive calls using GVoice since this morning
SteveInWA:
>:(
I'm skeptical that you carefully and completely followed every instruction. Do NOT try to restore any settings. Start completely over from scratch.
azrobert:
Quote from: glenviewjeff on May 14, 2018, 02:44:17 pm
I didn't lose all account information on the portal (for instance my speed dial settings were preserved.)
Speed dials are defined separately on the portal and will be preserved after a device reset. If you have multiple devices, the same speed dials will be downloaded to all.
corndog:
Quote from: SteveInWA on May 14, 2018, 04:39:44 pm
>:(
I'm skeptical that you carefully and completely followed every instruction. Do NOT try to restore any settings. Start completely over from scratch.
thanks for this fix. i had this problem this morning, and did most of these steps randomly and no worky. after i followed them to the letter i have service in SP1.
one question, when you say "don't disallow obi provisioning in any way? does that mean i can't override some of the obitalk settings. like the tone settings?
SteveInWA:
Glad it fixed your issue. You can modify any settings you wish, except leave the "Auto provisioning" settings alone.
corndog:
great, thanks! i still get the little red exclamation points by anything not device default or obitalk checked, but i assume those are just to signify they are not default.
edit
guess i can do my own research and not be so lazy, Steve has enough to do tonight...
"To the right of the configurable parameter value field, there may be a red exclamation mark (!). When this mark is present, it means the parameter value next to where it appears has an OBi Expert configuration database entry that is different than the OBiTALK database entry. If the Device Default and OBiTALK boxes are left unchecked, then the OBi will use this setting in its active configuration."
Navigation
[0] Message Index
[#] Next page
[*] Previous page