A few years ago, on my Obi202 when I was using it in front of my router, I was having problems and someone on these forums recommended I use Mac Cloning and set it to my PC's Mac address. So I did this in the following screen:
Router Configuration -> WAN Settings -> MACAddressClone : (my PC's MAC address).
Later I turned off that setting, deleted that address and reverted to Obitalk Settings for the MacAddressClone field, which kept it blank. I kept the Obi in front of my router and it worked well, for the most part, for several years.
Fast forward a few years and I've now moved my Obi so it's after my router (so it doesn't throttle my internet speed at 30meg). I've set up a static IP address through my Asus TM-AC1900 router for my Obi. However, I've experienced call problems and realized, from checking my router control panel, that my PC connected to the router and the Obi are still sharing my PC's Mac address.
I've gone back to the Obi's MacAddressClone settings, made sure it was still blank, resaved, rebooted and it didn't make a difference. The Obi is still using my PC's Mac address. I've tried checking the default device settings box for MacAddressClone and resaving and I've clicked the Obitalk Settings box and resaved everything.
Despite all that, my Obi is still using the PC's Mac address. Seems to me that it must be a bug in the Obi. Does anyone have any idea how I can get the Obi to use it's actual Mac address, which does show properly in the Obi's Device Configuration page in the Expert Configuration portal.
Any advice would be appreciated!