Obi 100 - Line Select

<< < (2/2)

azrobert:
Remove the following from the outbound route.
{(Mvg3):vg3},

The digit map has the beginning parenthesis in the wrong place.
(<**2>011xx.|(Mvg3)|[1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))

To route 8005551212 and area code 480 both with/without country code to SP2.
(<**2>(011xx.|1?8005551212|1?480xxxxxxx)|(Mvg3)|[1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))

The ITSP B (SP2) digit map must have a rule that matches these numbers.

ArbitaryTwist:
Thanks everybody that all worked.

I have one other issue with the OBI Phone Line. When i dial using the Phone Port which is the default, it takes 20 seconds before the call is placed out. I am not sure if its an OBI thing, but wondering if there is a timer setting in OBI which might cause this. I was going to hook the phone up directly and see if there is a lag also. My Phone port is a Sim Based Cellular Adapter for Home Phone.

Navigation

[0] Message Index

[*] Previous page