OBi200 as a GV Gateway for an OBi100

<< < (3/3)

SteveInWA:
Quote from: zsak23 on June 28, 2018, 03:05:12 pm

I have both devices.  The Obi100 is connected to the phone lines in the house.  It would be easiest for me to link the 2 than to physically replace it with the OBi200.


Why do you consider it "easiest"?  It takes less than 15 minutes to physically swap out the 100 for the 200 and configure the 200 to your needs.

dircom:
azrobert
I gave an Obi 100 to a friend in Belize, then a few years later sent an Obi 200 to work with GV.
Belize telecom seems to be blocking GV, they have a friend in town who uses another another ISP and GV on the Obi 200 will work there.
Could you tell me how calls to the 200 can be sent automatically to the Obi 100
and calls from the Obi 100 automatically dial out from the Obi 200?
At this moment the Obi 100 is in a separate dashboard with SP 1&2 not configured)
thanks
(The Obi 200 is still in my dashboard configured with a working GV #. I am thinking the 200 will have to come to the US briefly to reconfigure it to the "Belize dashboard"  I am thinking "trusted callers" might have something to do with future configurations)

Navigation

[0] Message Index

[*] Previous page