Obi202 Static when switching back back to original caller after call waiting
McTxE:
I'm having this problem, as well. I hope it's resolved soon; it's so aggravating!
MajorP:
I occasionally get the static also. The person on the other end can hear me but I can't hear them. I don't ever use the call waiting feature, so that isn't it.
zapattack:
Verify that Profile(x) SIP
X_Sticky18x
has both boxes un-checked.
If using an IP attached phone, it may need Sticky 183 set to YES.
Rick1441:
I've been having a similar problem with my Obi200 using Google Voice. I was going to start a new thread but then saw this one. If a call waiting comes in, the initial flash, to the second caller, works fine. But then the second flash, back to the first caller, just produces loud static. But in my case, the static is on both ends. Making things stranger still, sometimes the flash back to the first caller does work OK, in which case the static occurs with the third flash, i.e. when I go back to second caller. Standard analog phone.
Masterman:
This has been happening for a few months on my device. If I use the Google Phone app, there is no issue of the static when using hold or 3-way calling, but through the Obi device it is happening almost every time. I don’t see where this is being fixed/addressed.
Navigation
[0] Message Index
[#] Next page
[*] Previous page