Obi202 Static when switching back back to original caller after call waiting
managerharry:
It seems to be getting worse and now happens pretty much every time I switch back from call waiting. Here's a screenshot of the Obi status page while the static is happening:
SteveInWA:
To anyone still experiencing the static or distortion/echo under this scenario, please take note the next time this happens: stay on the call, despite the audio issue, for at least 10-15 seconds. Does the problem go away by itself?
managerharry:
Tested this. Static persists longer than 10-20 seconds. I let it go for nearly a minute and it never cleared up.
krowe:
Quote from: managerharry on May 15, 2018, 06:55:23 pm
Having some intermittent issues here. Using Obi202 with Google Voice. Obi is about 3 years old. Has most current firmware installed in ObiTalk portal. Most annoying issue is that sometimes when I'm on a call and have a call waiting if I switch over to the other caller I can talk to them fine but when I switch back to my original caller I get just static and have to hang up. Also, I've been getting occasional dead air calls where the phone rings and I answer but can't hear the caller nor can they hear me.
I'm not apposed to buying a new Obi202 if it would help but I don't want to spend the money only to find out that the problem still occurs with the new device.
Anyone else having similar issues or have any suggested fixes?
I too am having this problem. The only difference for me is my OBi202 is less than 1 yr old, and the problem happens every time I switch from a call waiting call back to the original call and I can't say that I am getting the dead air calls.
SteveInWA:
If you have not already done so, please start a discussion post over on the Google Voice forum for this specific issue. The link is in my signature line below. I'm collecting data to try to pin down the root cause.
Navigation
[0] Message Index
[#] Next page
[*] Previous page